Seasonal Readiness

Fix it before the freeze: Gates, railings, trailer frames, and exterior equipment repairs handled now endure winter weather, before January freezes lock up hardware and back up the shop schedule.

Schedule repair before cold sets in
Custom Welding & Heavy Steel Fabrication

If you can draw it,
we can build it.

Winter is coming for the work that lives outside. Gates, railings, trailer repairs, and equipment fixes that get done now hold up through the freeze, instead of failing in January when the shop is backed up and the cold makes every repair harder.

We build the metal work other shops turn down: custom fabrication, field repairs, and one-off parts, cut, welded, and finished to the drawing, so you get a real piece of steel back, not a shrug and a referral.

Upload Project Specs
Direct shop review within 24 hrs

"Bring a drawing, a photo, or the broken part. We will tell you straight if we can build it."

Arcwright Fabrication shop floor with weld flash and heavy sparks flying across steel bench
Bay 02 // Active MIG & TIG Weld LineLive Shop Floor
Tolerances ±0.030"
Shop Scope & Capabilities

What we build.

Every piece is cut, welded, and inspected on our floor. If you have the drawing or the broken sample, we build it to spec.

[01]

Custom fabrication

One-off parts, brackets, adaptors, and custom equipment built from sketches or blueprints.

Who it fits: Fits contractors, machine shops, and creators with custom geometry standard vendors do not stock.

Typical stock: Mild steel plate, AR400 wear plate, aluminum, 304/316 stainless
[02]

Gates and railings

Heavy-duty security gates, commercial safety railings, and ADA-compliant handrails built square and plumb.

Who it fits: Fits property owners, general contractors, and facility managers preparing outdoor perimeter steel for winter.

Typical stock: Square tubing, solid bar, punched channel, primer & powder coat ready
[03]

Trailer and equipment repair

Structural frame straightening, tongue replacements, cracked excavator bucket rebuilds, and axle gusseting.

Who it fits: Fits landscapers, farmers, excavation crews, and fleet operators who cannot afford downtime.

Typical stock: High-tensile structural channel, hardened wear strips, fishplates
[04]

Structural steel

Support posts, headers, flitch plates, mezzanine framing, and certified reinforcement assemblies.

Who it fits: Fits residential and light commercial builders needing immediate turnarounds on engineered steel.

Typical stock: W-beams, HSS tube columns, baseplates, structural angle
[05]

Ornamental and architectural metal

Custom steel stair stringers, fireplace mantels, modern steel planters, and clean industrial furniture.

Who it fits: Fits interior designers, custom home builders, and architects requiring crisp exposed welds.

Typical stock: Hot-rolled pickled & oiled steel, brass accents, blackened patina finishes
Have a part with unusual angles or uncommon alloy specifications?Send your drawing for immediate review
Capability Showcase

The work.

[Finished pieces standing square. The work does the talking.]
Commercial security gate & industrial perimeter fence
Placeholder Image — Representative Capability
16ft span x 7ft height

Commercial security gate & industrial perimeter fence

Material: 2x2" 11-gauge square tubing, 5/8" solid pickets, anti-sag gussets

Commercial equipment frame overhaul & gusset reinforcement
Placeholder Image — Representative Capability
Full axle-box rebuild

Commercial equipment frame overhaul & gusset reinforcement

Material: 3/8" A36 structural plate, AR400 hardened wear strips

Sanitary stainless TIG weldment & custom fluid manifold
Placeholder Image — Representative Capability
Tested to 150 PSI

Sanitary stainless TIG weldment & custom fluid manifold

Material: 304 Stainless steel schedule 40 tube, purged root bead

Architectural floating stair stringer & mounting plates
Placeholder Image — Representative Capability
14-tread continuous rise

Architectural floating stair stringer & mounting plates

Material: 1/2" laser-cut pickled & oiled hot-rolled steel

Have a project similar to these? Upload drawings or photos of the existing space or part.

Upload Project Specs
Shop Protocol

How a job runs.

No ambiguity. Three steps from first sketch to finished steel in your hands.

STEP 01INSPECTION

Upload your specs, a drawing, a photo, or measurements.

Napkin sketches, CAD files, or photos of broken equipment are all accepted.

STEP 02AGREEMENT

A straight answer and a written quote, with material and timeline.

We evaluate feasibility, stock requirements, and confirm exact turnaround.

STEP 03EXECUTION

Build, finish, and deliver or install.

Clean beads, squared corners, de-burred edges, and delivery ready for service.

Cost Transparency

What drives the price.

No mystery estimates. We quote each job based on raw steel costs, shop hours, weld complexity, and coatings.

01 / Material Grade

Alloy & Thickness

Standard structural A36 mild steel is economical. Stainless steel (304/316) and abrasion-resistant plate (AR400) require specialized shielding gas and tooling.

[Placeholder range]: Base stock typically accounts for 30–45% of total project cost.
02 / Geometry

Fit-Up & Tolerance

Straight square cuts and standard 90° joints run fast. Compound miters, rolled radius tubing, multi-pass full-penetration welds, and tight machinable tolerances add bench time.

[Placeholder range]: Bench prep & jigging billed strictly on verified drawing complexity.
03 / Surface Coating

Corrosion Protection

Raw steel is ready for welding. Exterior installations require sandblasting, epoxy primer, powder coating, or hot-dip galvanizing to withstand winter road salt and weather.

[Placeholder range]: Commercial powder coating adds estimated $15–$30/linear ft.
04 / Lead Time

Turnaround Speed

Standard production queues maintain standard rates. Expedited 24-48 hour turnaround on emergency trailer or agricultural repairs requires bump fees and dedicated jig allocation.

[Placeholder range]: Expedited weekend repair slots quoted upon spec review.

You approve the quote before any steel gets cut.

All pricing figures shown are placeholders until our shop provides a written proposal for your specific specs.

Upload Specs for Written Quote
Questions & Answers

Frequently asked questions.

Straight answers on files, turnaround, on-site capabilities, and parts matching.

Can you match an existing part?

Yes. Bring in the bent, cracked, or broken piece. We take mechanical measurements with calipers and pitch gauges, reverse-engineer the geometry, and fabricate a clean replacement.

Note: Standard reverse engineering service.

What files can I send?

We accept PDF engineering drawings, DXF/DWG CAD files, STEP 3D models, or clear smartphone photos (JPG, PNG) taken with a tape measure laid alongside the part.

Note: All standard drawing formats welcome.

Do you do on-site welding?

Yes, for structural installations, heavy equipment repairs, and gate fitting within our local service radius [Placeholder: 45-mile shop radius]. Stationary bench work runs at our shop.

Note: [Placeholder confirmation required by shop].

What finishes do you offer?

Raw deburred steel, shop primer, industrial enamel paint, durable powder coating, and hot-dip galvanizing via our regional processing partners.

Note: Specified on your written quote.

How fast is a typical repair?

Most equipment and trailer repairs turn around in 2 to 4 business days. [Placeholder timeline: Subject to in-stock steel and seasonal freeze backlog].

Note: [Placeholder timeline until verified].
MANDATORY SYSTEM NOTICE

Form is a visual placeholder. Connect it to the shop's inbox or CRM before launch. The upload must accept real files at launch.

Direct Shop Intake

Upload Project Specs.

Send your blueprint, sketch, broken part photos, or project measurements. We review every submission within 24 hours and tell you straight if we can build it.

Click to select drawing or photo from your computer or phone camera

Supported formats: PDF, PNG, JPG, DXF, DWG up to 25MB

You will receive a direct shop response with material feasibility and written timeline. You approve the quote before any steel gets cut.

See the System